Customer and frame
A and DBL are printed inside the temple, e.g. 52□18-140 → A 52, DBL 18. For the best accuracy, measure each frame model once with a caliper and use those numbers.
Customer wears the frame (demo lenses are fine). Device upright at the customer's eye level, 40–50 cm away: on a stand with the front camera, or held by staff with the back camera (sharper, switch it on the camera screen). On iPad turn Center Stage off (Control Centre → Video Effects): it moves the picture and breaks the maths.
Check the front photo
Place lines on the inside edge of the rim (where the lens starts). R = customer's right eye, on the left of the photo. With the layout shown, drag the far/near reference circles to adjust them.
Lens and frame
Head rotation compensation
Side photo
Reference (validation, optional)
Calibrate this camera with this photo
Do this once per tablet. Hold a tape measure from the camera lens to the front of the frame, take a front photo, place the outer-edge lines carefully, then enter the distance.
Check the side photo
Prescription
| Eye | SPH | CYL | AXIS | ADD |
|---|---|---|---|---|
| R OD | ||||
| L OS |
How the glasses will be used
Demonstration
Calculated from this prescription, the frame size and where the optical centre sits in this frame (from the measurement). Thickness is drawn 3× enlarged in the cross-sections so it is easy to see. Estimate ±0.3 mm: the exact lens shape and the lab's base curve change it slightly.
All lens materials for this prescription and frame
Recommendation
Enter the prescription.
Validation: app vs reference
Rule of thumb: use the app for progressives only when at least 90% of PD and fitting-height readings are within 1 mm of the reference over 30+ customers.
Customers
Shop details (for the report)
Camera
Calibrate each camera you use (front and back) once: the calibration is stored per camera.
Frame list
Each frame model's true size, filled in automatically by SKU on the first screen. Printed sizes are often off by 0.5–1 mm: measure each model once with a caliper, correct it here and tick "Caliper". Frames are added when you save a measurement with a SKU.